Don’t let mold grow inside your home or office!
If you live in Wake County, the chances are that you have a crawl space. However, if you have vents rather than crawl space insulation, many issues can come along with it. You must seal your Cameron Village, NC crawl space to keep out things that could damage your home.
Moisture is one of the worst factors that can enter your crawl space. To keep your crawl space safe from water and moisture, you need crawl space encapsulation. Do you know what crawl space encapsulation is and why it’s so essential? Also, do you know the dos and don’ts of encapsulation? Luckily, Sealed Solution is here to help you through this journey of protecting your crawl space. To learn everything you need to know, keep reading below and call Sealed Solution for additional information.
What Is Crawl Space Encapsulation?
You first need to understand what crawl space encapsulation in Wake County is before you can learn the dos and don’ts. Encapsulation is an extra layer of protection against moisture. You may wonder if you need encapsulation if you already have crawl space insulation, but encapsulation can help keep your home safe. While insulation helps, there are other ways you can continue to protect your home. For example, vapor barriers also keep moisture from entering your crawl space. Encapsulation provides an extra layer of protection.
Completely sealing your crawl space makes his heavy-duty barrier most effective in blocking moisture. But what else do you need to know about encapsulation? There’s a lot to learn.
Do: Address Issues With the Crawl Space First
Before you can add crawl space insulation in Cameron Village, NC, you need to ensure that there aren’t any issues with the space. The last thing you want to do is accidentally seal damages into the crawl space. You need to address any repairs, or the issues can persist.
For example, you need to ensure no moisture has already built up in your Wake County crawl space. If you encapsulate your space without removing the water source, you can create a space conducive to mold growth.
If you already have mold inside your crawl space, you need to remove it before encapsulating. If you fail to remove the mold, it can continue to grow. Mold growth won’t only harm your crawl space. Since this space circulates air throughout your whole home and regulates your temperature, the spores can enter your living space. Also, mold can cause wood to deteriorate, so you can also harm your foundation by forgetting this step. For your health and safety, you need to keep mold out of your crawl space.
Don’t: Encapsulate Without Sealing
You should never encapsulate your Wake County crawl space without sealing it first. Before installing encapsulation, you should have crawl space insulation added. This will act as the first barrier against moisture. Failing to insulate your crawl space can let moisture or pests inside.
Do: Seal the Space
However, what should you seal before crawl space encapsulation? As we previously mentioned, you need insulation in your Cameron Village, NC home. You should also install a vapor barrier in your crawl space to keep moisture from accumulating.
Also, if you have any vents in your crawl space, you should have them sealed and closed. Vents let outside air inside. Often, the air outside your home is a different temperature than that inside your house. When these different temperatures meet, condensation can form. So even if you have encapsulation, you can risk mold growth if you don’t seal the crawl space.
Don’t: Insulate With Fiberglass
When you plan on installing a crawl space encapsulation, you shouldn’t use fiberglass for your crawl space insulation. That’s because fiberglass absorbs moisture. When the whole goal is to prevent moisture, you waste your time installing the encapsulation.
While fiberglass insulation once reigned supreme in crawl spaces, it has gone out as the most popular crawl space insulation. Instead, you can choose spray foam insulation for your crawl space. Therefore, if you plan on encapsulating your crawl space, keep fiberglass out of it. If you already have fiberglass in your crawl space, you should call Sealed Solution to replace your insulation before you move forward with encapsulating.
Do: Control the Moisture
The most important step is to control moisture. You can do this in many ways, such as ensuring you remove any pooled moisture or damage before sealing and closing your vents. Lining the walls and floors with a vapor barrier can help control moisture and temperature.
Controlling the temperature can also help you keep moisture from getting into your crawl space. When you ensure the air in your crawl space is the same temperature as that in your home, you know you can keep out moisture. That’s why controlling these aspects is essential for the safety of your home and crawl space.
Don’t: Skip Drainage
Finally, you should never skip adding drainage to your Wake County crawl space. Don’t fall into the misunderstanding that encapsulation alone will keep moisture out of the space. While it can help keep moisture down, it cannot get rid of it forever. Installing a water drainage system that will keep water away from your crawl space can save you hundreds if not thousands of dollars in repair.
Also, ensure you maintain the drainage system around your home. As long as you keep your drainage system working fine, you can stop water from entering your crawl space.
Can You Benefit From Crawl Space Encapsulation?
So can you benefit from crawl space encapsulation in your Cameron Village, NC home? After considering the many advantages of encapsulation—and the damages of ignoring your crawl space—you should install encapsulation as soon as possible.
You should always have a professional install your encapsulation. There are so many factors that can go wrong if you don’t make the right move. If you forget about crawl space insulation, vapor barriers, or accidentally install fiberglass, it can ruin everything you did to protect your home. Mold is dangerous, and you don’t want to risk letting it into your home.
That’s why you should call Sealed Solution at 919-302-1081. We can install your encapsulation, so you never have to worry about your crawl space again.
Village District, was the first planned community to be developed in Raleigh, North Carolina. Development was started in 1947 when J.W. York and R.A Bryan bought 158 acres (64 ha) of undeveloped land two miles west of downtown Raleigh, near the North Carolina State University campus. The ‘village’ was to consist of a shopping center, apartments, and single family homes. The area was renamed to Village District in 2021 to distance itself from the slave owning Cameron plantation it was originally named after.
The shopping center opened in 1949, as Cameron Village, and quickly became the premier shopping area in Raleigh. It is also considered the first shopping center to be built between Washington, D.C. and Atlanta. The shopping center is an open-air shopping mall, but unlike a strip mall, the stores are divided into blocks with some on two levels. Several parking decks were built in the 1960s, although most of these were removed in later renovations, to give a more open feel.
Cameron Village grew quickly, and by 1950 the community had 65 stores, a movie theater, more than 600 homes and apartments, and over 100 business/professional offices. Downtown Raleigh, which had been the primary shopping location in the Raleigh area, started to see a decline in business as consumers gravitated toward the convenient parking of Cameron Village.
The Occidental Life Insurance Company Building was added to Cameron Village in 1956. It was listed on the National Register of Historic Places in 2003.
Learn more about Cameron Village.
Here are some inspection-related links: