Don’t let mold grow inside your home or office!
If you live in Wake County, the chances are that you have a crawl space. However, if you have vents rather than crawl space insulation, many issues can come along with it. You must seal your Raleigh, NC crawl space to keep out things that could damage your home.
Moisture is one of the worst factors that can enter your crawl space. To keep your crawl space safe from water and moisture, you need crawl space encapsulation. Do you know what crawl space encapsulation is and why it’s so essential? Also, do you know the dos and don’ts of encapsulation? Luckily, Sealed Solution is here to help you through this journey of protecting your crawl space. To learn everything you need to know, keep reading below and call Sealed Solution for additional information.
What Is Crawl Space Encapsulation?
You first need to understand what crawl space encapsulation in Wake County is before you can learn the dos and don’ts. Encapsulation is an extra layer of protection against moisture. You may wonder if you need encapsulation if you already have crawl space insulation, but encapsulation can help keep your home safe. While insulation helps, there are other ways you can continue to protect your home. For example, vapor barriers also keep moisture from entering your crawl space. Encapsulation provides an extra layer of protection.
Completely sealing your crawl space makes his heavy-duty barrier most effective in blocking moisture. But what else do you need to know about encapsulation? There’s a lot to learn.
Do: Address Issues With the Crawl Space First
Before you can add crawl space insulation in Raleigh, NC, you need to ensure that there aren’t any issues with the space. The last thing you want to do is accidentally seal damages into the crawl space. You need to address any repairs, or the issues can persist.
For example, you need to ensure no moisture has already built up in your Wake County crawl space. If you encapsulate your space without removing the water source, you can create a space conducive to mold growth.
If you already have mold inside your crawl space, you need to remove it before encapsulating. If you fail to remove the mold, it can continue to grow. Mold growth won’t only harm your crawl space. Since this space circulates air throughout your whole home and regulates your temperature, the spores can enter your living space. Also, mold can cause wood to deteriorate, so you can also harm your foundation by forgetting this step. For your health and safety, you need to keep mold out of your crawl space.
Don’t: Encapsulate Without Sealing
You should never encapsulate your Wake County crawl space without sealing it first. Before installing encapsulation, you should have crawl space insulation added. This will act as the first barrier against moisture. Failing to insulate your crawl space can let moisture or pests inside.
Do: Seal the Space
However, what should you seal before crawl space encapsulation? As we previously mentioned, you need insulation in your Raleigh, NC home. You should also install a vapor barrier in your crawl space to keep moisture from accumulating.
Also, if you have any vents in your crawl space, you should have them sealed and closed. Vents let outside air inside. Often, the air outside your home is a different temperature than that inside your house. When these different temperatures meet, condensation can form. So even if you have encapsulation, you can risk mold growth if you don’t seal the crawl space.
Don’t: Insulate With Fiberglass
When you plan on installing a crawl space encapsulation, you shouldn’t use fiberglass for your crawl space insulation. That’s because fiberglass absorbs moisture. When the whole goal is to prevent moisture, you waste your time installing the encapsulation.
While fiberglass insulation once reigned supreme in crawl spaces, it has gone out as the most popular crawl space insulation. Instead, you can choose spray foam insulation for your crawl space. Therefore, if you plan on encapsulating your crawl space, keep fiberglass out of it. If you already have fiberglass in your crawl space, you should call Sealed Solution to replace your insulation before you move forward with encapsulating.
Do: Control the Moisture
The most important step is to control moisture. You can do this in many ways, such as ensuring you remove any pooled moisture or damage before sealing and closing your vents. Lining the walls and floors with a vapor barrier can help control moisture and temperature.
Controlling the temperature can also help you keep moisture from getting into your crawl space. When you ensure the air in your crawl space is the same temperature as that in your home, you know you can keep out moisture. That’s why controlling these aspects is essential for the safety of your home and crawl space.
Don’t: Skip Drainage
Finally, you should never skip adding drainage to your Wake County crawl space. Don’t fall into the misunderstanding that encapsulation alone will keep moisture out of the space. While it can help keep moisture down, it cannot get rid of it forever. Installing a water drainage system that will keep water away from your crawl space can save you hundreds if not thousands of dollars in repair.
Also, ensure you maintain the drainage system around your home. As long as you keep your drainage system working fine, you can stop water from entering your crawl space.
Can You Benefit From Crawl Space Encapsulation?
So can you benefit from crawl space encapsulation in your Raleigh, NC home? After considering the many advantages of encapsulation—and the damages of ignoring your crawl space—you should install encapsulation as soon as possible.
You should always have a professional install your encapsulation. There are so many factors that can go wrong if you don’t make the right move. If you forget about crawl space insulation, vapor barriers, or accidentally install fiberglass, it can ruin everything you did to protect your home. Mold is dangerous, and you don’t want to risk letting it into your home.
That’s why you should call Sealed Solution at 919-302-1081. We can install your encapsulation, so you never have to worry about your crawl space again.
Raleigh is the capital of the state of North Carolina and the seat of Wake County in the United States. It is the second-most populous city in North Carolina, the 41st-most populous city in the U.S., and the largest city of the Research Triangle metro area. Raleigh is known as the ‘City of Oaks’ for its many oak trees, which line the streets in the heart of the city. The city covers a land area of 147.6 square miles (382 km2). The U.S. Census Bureau counted the city’s population as 474,069 in 2020. It is one of the fastest-growing cities in the country. The city of Raleigh is named after Walter Raleigh, who established the lost Roanoke Colony in present-day Dare County.
Bath, the oldest town in North Carolina, was the first nominal capital of the colony from 1705 until 1722, when Edenton took over the role. The colony had no permanent institutions of government until the new capital, New Bern, was established in 1743.
In December 1770, Joel Lane successfully petitioned the North Carolina General Assembly to create a new county. On January 5, 1771, the bill creating Wake County was passed in the General Assembly. The county was formed from portions of Cumberland, Orange, and Johnston counties, and was named for Margaret Wake Tryon, the wife of Governor William Tryon. The first county seat was Bloomsbury.
New Bern, a port town on the Neuse River 35 miles (56 km) from the Atlantic Ocean, was the largest city and the capital of North Carolina during the American Revolution. When the British Army laid siege to the city, that site could no longer be used as capital. From 1789 to 1794, when Raleigh was being built, the state capital was Fayetteville.
Here are some inspection-related links: